<source id="8ofhb"></source>
<rp id="8ofhb"><menu id="8ofhb"></menu></rp>

<samp id="8ofhb"><td id="8ofhb"></td></samp>
  • <b id="8ofhb"><small id="8ofhb"><output id="8ofhb"></output></small></b>

    <b id="8ofhb"><address id="8ofhb"><object id="8ofhb"></object></address></b>
    <source id="8ofhb"></source>

  • new
    Home   Products   Company   Support  Download  Videos   Employment  Contact   Chinese  
    Products
    waterjet cutting waterjet cutting   machine
    waterjet cutting 4 or 5 axis waterjet cutter
    waterjet cutting waterjet pipe cutter
    waterjet cutting CNC plasma cutter
    waterjet cutter ultra high pressure pump
    waterjet cutter Overpass cutting table
    waterjet cutter Cantilever cutting table
    waterjet cutter Super large cutting table
    CNC waterjet Waterjet CNC controller
    waterjet hopper Abrasive feeding system
    waterjet cleaning machine High pressure waterjet cleaning machine
    Waterjet robotic Waterjet robotic
    CNC EDM wire cutting machine CNC EDM wire cutting machine
    CNC EDM wire cutting machine More photos of the CNC waterjet cutter
    waterjet spare parts Spare parts of waterjet           mahcine

    Company News


    Contact us

    CNC waterjet cutting contact us

    What is CNC Plasma Tube cutter?

    This is a cutting machine that uses plasma as power source to make cuts on various shapes of tubes or beams, such as square tubes, round tubes, I beams, H beams, or C beams. CNC controller is used to control the motion of this CNC plasma cutting torch or the rotation of the tubes or beams. The picture below shows a typical system of plasma tube cutting machine. It consists of CNC controller, plasma power, and tube feeder.
    Plasma square tube cutting machine

    What shapes can CNC Plasma Tube cutter cut?

    With the help of CNC controller, the plasma torch can move linearly in both X and Y direction, while the square tube, the round tube or the beams can be rotated. The combined CNC movement enables the CNC plasma cutter to cut almost any shape on the tubes. The below pictures demonstrate some examples of what the cutter can do.

    Plasma cutting machines
    Plasma cutting machines

    Models and specification of CNC Plasma Tube cutter

    CNC plasma tube cutting machine is mainly useful to cut metal square tubes, angels, H or C beams, and also round pipes. The machine can cut off the beam to length, or cut openings of any desired shapes. It is of 5 axis CNC and equipped with servo system and linear guides for precision motion control. Plasma torch height control and collision protection are also included.

    Models of plasma tube cutters are mainly Specified by the length of tubes the machine can cut, and also the size of the tube the plasma tube cutter can rotate and cut, the OD of the round tube, or the square size of the square tubes. Often the type of the plamsa power is part of the specification of the overall plasma tube cutter.

    Detailed Description of CNC Plasma Tube cutter

    A complete set of CNC plasma tube cutting machine system consists of 4 major components: Cantielver torch carrier, Tube rotaion and feeding frame, CNC controller, and Plasma power unit with machine torch.

    1. Cantielver plasma torch carrier.


    Plasma square tube cutting machine

    The plasma tube cutting machine has a 3 axis torch carrier. X axis along the cantilever arm, Y axis along the tube length, and Z is vertical. When adding a fourth axis, bevelled edge can be cut either on the wall of tube, or at the end of tube.

    The plasma torch carrier also includes design of collision protection. In the even of plasma torch hits something, the CNC will receive a signal and stop the motion. In the vertical direction, torch carrier also includes motion system to allow detection of cutting surface and adjustment of torch height based on feedback of plasma arc voltage during cutting.

    2. Tube rotaion and feeding frame.


    Plasma square tube cutting machine

    The plasma tube cutting machine includes a two-axis tube roptation and feed system. The tube or beam can be rotated during cut as well as moved in the tube length direction (feeding). The tube or beam is held by two synchronous chucks, one in the front, and one in rear. The rear chuck is also drive by a servo motor to move along the length of the tube so that the tube is fed to the plasma cutting torch.

    3. CNC controller.

    Plasma square tube cutter CNC controller

    The entire plasma tube cutting machine has 5 axis of motion and is controlled by CNC controller. The controller is PC based and runs on Windows 7 system. It serves as the interface between operator and the hardware of the plasma cutter.

    Controller is compatible to dxf or G-code. Users should prepare their designs with a CAD software, such as Solidworks, and generate the cutting path G-code with a CAM software such as SIGMATUBE.

    4. Plasma power unit with torch.


    Plasma beam tube cutting machine

    Plasma power unit with machine torch is selected to meet the specific cutting needs.
    waterjet contact us
    Copyright Nanjing Bitong Technology Co., Ltd.      ? All Rights Reserved.     備案號:蘇ICP備08003750號-1
    精久久免费视频,人人操人人干人人插,亚洲一区二区三区日本韩,天天做天天摸天天爽视频