<source id="8ofhb"></source>
<rp id="8ofhb"><menu id="8ofhb"></menu></rp>

<samp id="8ofhb"><td id="8ofhb"></td></samp>
  • <b id="8ofhb"><small id="8ofhb"><output id="8ofhb"></output></small></b>

    <b id="8ofhb"><address id="8ofhb"><object id="8ofhb"></object></address></b>
    <source id="8ofhb"></source>

  • new
    Home   Products   Company   Support  Download  Videos   Employment  Contact   Chinese  
    Products
    waterjet cutting waterjet cutting   machine
    waterjet cutting 4 or 5 axis waterjet cutter
    waterjet cutting waterjet pipe cutter
    waterjet cutting CNC plasma cutter
    waterjet cutter ultra high pressure pump
    waterjet cutter Overpass cutting table
    waterjet cutter Cantilever cutting table
    waterjet cutter Super large cutting table
    CNC waterjet Waterjet CNC controller
    waterjet hopper Abrasive feeding system
    waterjet cleaning machine High pressure waterjet cleaning machine
    Waterjet robotic Waterjet robotic
    CNC EDM wire cutting machine CNC EDM wire cutting machine
    CNC EDM wire cutting machine More photos of the CNC waterjet cutter
    waterjet spare parts Spare parts of waterjet           mahcine

    Contact us

    CNC waterjet contact us

    Waterjet Cutting Machine with 4 or 5 axis tilt

    5 axis waterjet

    4-axis

    5 axis waterjet

    5-axis

              Tilting head waterjet has two major features: first to remove taper when it is not desired. Second, sometimes, 3D slope on the edge is needed by design, the tilting head can help to achieve this.

    4-axis:
              the main purpose to develop 4 axis machine is to remove taper at the cutting edge produced with 3 axis waterjet cutting machine. This 4 axis manually tilt the cutting head to offset the taper angle and the 4th axis (rotation around the Z axis) allows the tilting always pointing inner or outer side, depending on whether we need the hole or need the cut off part. We make the hardware to be capable of tilting +/-10 degrees. You will still make the dxf design, and import it to the 4axis Ncstudio software. The software will follow the dxf and rotate the 4 axis such at the tilting always points into the part or away from the part.
    part cut with 3 axis Waterjet Machine
    cut by standard 3 axis
    part cut with 4 axis Waterjet cutter
    edge tapering by 4 axis
              The above pictures show part with taper from conventional waterjet cutting on left and part on the right with no taper as a result of 4 axis waterjet cutting.

              Almost all conventional cutting methods, such as waterjet, laser, or plasma, has the characteristic edge effect of taper of 1 to 2 degrees. For most of the cutting needs, taper is undesired. 4 or 5 axis cutting machines can correct this problem. We can apply this technology to waterjet cutters and plasma cutters. 4 or 5 axis wagterjet, with the help of CNC control software, can tilt the cutting head dynamically against the taper to offset the unwanted slope. One point worth to mention here is that the tilt creats more slope on the scrape side of the work piece. Therefore if both side of the cut is needed, then the tilting is not a solution to reduce taper.


    5-axis(3D CNC five axis waterjet cutting machine)
              State of art technology 4 or 5 axis waterjet cutting machine can tilt cutting head to achieve sophisticated cutting results that conventional 3 axis water jet cutter can not achieve. Dynamic tilt head water jet has the following two major advantages: First to remove taper when it is not desired. Second, sometimes, slope on the edge is of design.
              3D cutting usually requires 5 axis controller and 5 axis cutting head assembly. There are often two types of 5 axis configuration, AB and AC. Most commonly, five axis waterjet is constructed by AC type. It is usually very difficult to program the 3D cutting by a person. It requires special CAM software to translate 3D drawing to machine language, G-code, for the CNC controller to excute.




    5axis ac square


    5axis ac circle
    5 axis waterjet

    AC style 5X CNC waterjet cutting machine
    5 axis waterjet

    AC style 5X CNC waterjet cutting machine
    5 axis waterjet

    sample cut by 5 axis
    5 axis waterjet

    sample cut by 5 axis
    Tilting waterjet cutting applied to waterjet pipe cutting machine can make beveled cut at the end of pipe or cut opennings with beveled edges in the pipe wall to prepare for welding.
    waterjet contact us
    Copyright Nanjing Bitong Technology Co., Ltd.      ? All Rights Reserved.     備案號:蘇ICP備08003750號-1
    精久久免费视频,人人操人人干人人插,亚洲一区二区三区日本韩,天天做天天摸天天爽视频